Size & fit guide
Earring Size, Weight & Comfort
Size, next to US coins
Coins are drawn to scale with each other. Sizes on product pages are height x width in mm and inches.
Dime17.91 mm · 0.71 inSmall hoops & huggiesPenny19.05 mm · 0.75 inHoops around 20 mmNickel21.21 mm · 0.84 inSmall–medium hoopsQuarter24.26 mm · 0.96 inMedium hoops
Weight & comfort
We weigh one earring, not the pair. US coins weigh a fixed amount, so they make a handy reference.
- Featherlight0–2 gLighter than a dime (2.27 g). Our lightest pieces.
- Lightweight2–4.5 gAbout one or two dimes. Easy to wear for most of the day.
- Medium4.5–7 gAbout a nickel (5 g) or a quarter (5.67 g).
- Substantial7–10 gAbout a quarter and a dime, up to two nickels.
- Heavyweightover 10 gMore than two nickels. Among our heaviest.
Weight classes describe feel, not a guarantee of comfort or wear time.
Post thickness
- 22G0.64 mmFine post for most pierced ears
- 20G0.81 mmThe most common post
- 18G1.02 mmSlightly thicker
- 16G1.29 mmThicker, often for cartilage
Closures
- Hinged Clicker
- Open the hinge, pass the post through, and press until it clicks.
- Hinged Snap Closure
- Open at the hinge, pass the post through, and press until it snaps shut.
- Butterfly Back
- Push the post through, then slide the butterfly back on until snug.
- Screw Back
- Turn the back clockwise onto the threaded post until snug; turn counterclockwise to remove.
- Omega Back
- Pass the post through, then close the hinged clip onto it behind your ear.
- Lever Back
- Open the hinged lever, pass the wire through, and press the lever closed.
Where to wear
MOBODUC earrings are designed for the lobe and upper lobe of healed piercings.
Hoop size guide → · Clasps & closures →
Women’s Necklace Length & Fit
On adjustable necklaces the length class is based on the shortest setting.
How to measure
Lay a string around your neck where you’d like the chain to sit, then measure it. Pendants hang a little lower; for layering, leave about 2″ between necklaces.
Clasps
- Lobster Clasp
- Pull the small lever to open the claw, hook it through the ring, then let go.
- Spring Ring Clasp
- Pull the small tab back to open the ring, slip the jump ring in, then release.
- Box Clasp
- Press the tongue and slide it into the box until it clicks, then close the safety latch. Used on tennis styles.
- Fold-Over Clasp
- Lift the lever, fit it over the bar and press it flat until it snaps shut.
Full necklace length guide →
Men’s Necklace Length & Fit
On adjustable necklaces the length class is based on the shortest setting.
How to measure
Lay a string around your neck where you’d like the chain to sit, then measure it with a ruler.
Clasps
- Lobster Clasp
- Pull the small lever to open the claw, hook it through the ring, then let go.
- Spring Ring Clasp
- Pull the small tab back to open the ring, slip the jump ring in, then release.
- Box Clasp
- Press the tongue and slide it into the box until it clicks, then close the safety latch. Used on tennis styles.
- Fold-Over Clasp
- Lift the lever, fit it over the bar and press it flat until it snaps shut.
Full necklace length guide →
Women’s Bracelet Size & Fit
| Wrist size | Class | Good for |
|---|
| Under 5.5” | Petite | Smaller wrists |
| 5.5”–6.5” | Classic | A standard wrist-size range |
| 6.5”–7.5” | Extended | A roomier wrist-size range |
| Over 7.5” | Extra Extended | Larger wrist measurements |
What the product page shows
- Chain bracelet
- Length, plus the extender range when there is one, e.g. 6.5” + 2” extender (adjustable 6.5”–8.5”).
- Bangle & cuff
- The wrist range it fits, e.g. “Fits wrists about 5.5”–7””.
How to measure
Wrap a tape measure, string or paper strip around your wrist just above the wrist bone, mark where it meets and measure it with a ruler. If you use a printable sizer, print it at 100% scale.
For a chain bracelet, add about 0.5” to your wrist size for a close fit or about 1” for a relaxed fit. An extender chain widens the range.
Clasps
- Lobster Clasp
- Pull the small lever to open the claw, hook it through the ring, then let go.
- Spring Ring Clasp
- Pull the small tab back to open the ring, slip the jump ring in, then release.
- Box Clasp
- Press the tongue and slide it into the box until it clicks, then close the safety latch. Used on tennis styles.
- Fold-Over Clasp
- Lift the lever, fit it over the bar and press it flat until it snaps shut.
Men’s Bracelet Size & Fit
| Wrist size | Class | Good for |
|---|
| Under 6.5” | Compact | Smaller wrist measurements |
| 6.5”–7.5” | Classic | A standard wrist-size range |
| 7.5”–8.5” | Extended | A roomier wrist-size range |
| Over 8.5” | Extra Extended | Larger wrist measurements |
What the product page shows
- Chain bracelet
- Length, plus the extender range when there is one, e.g. 6.5” + 2” extender (adjustable 6.5”–8.5”).
- Bangle & cuff
- The wrist range it fits, e.g. “Fits wrists about 5.5”–7””.
How to measure
Wrap a tape measure, string or paper strip around your wrist just above the wrist bone, mark where it meets and measure it with a ruler. If you use a printable sizer, print it at 100% scale.
For a chain bracelet, add about 0.5” to your wrist size for a close fit or about 1” for a relaxed fit. An extender chain widens the range.
Clasps
- Lobster Clasp
- Pull the small lever to open the claw, hook it through the ring, then let go.
- Spring Ring Clasp
- Pull the small tab back to open the ring, slip the jump ring in, then release.
- Box Clasp
- Press the tongue and slide it into the box until it clicks, then close the safety latch. Used on tennis styles.
- Fold-Over Clasp
- Lift the lever, fit it over the bar and press it flat until it snaps shut.
Ring Size & Fit
We make whole US sizes only (no half sizes). Each product page shows the sizes available for that ring.
| US size | Inner diameter | Finger circumference |
|---|
| 4 | 14.9 mm | 46.8 mm |
| 5 | 15.7 mm | 49.3 mm |
| 6 | 16.5 mm | 51.9 mm |
| 7 | 17.3 mm | 54.4 mm |
| 8 | 18.1 mm | 57.0 mm |
| 9 | 18.9 mm | 59.5 mm |
| 10 | 19.8 mm | 62.1 mm |
| 11 | 20.6 mm | 64.6 mm |
| 12 | 21.4 mm | 67.2 mm |
| 13 | 22.2 mm | 69.7 mm |
How to measure
Measure the inner diameter of a ring that fits the same finger, or wrap a strip of paper around your finger and compare the circumference with the table. Measure at the end of the day when your fingers are warm, and make sure the ring can pass over your knuckle.
Wide bands (for example 8 mm) fit more snugly. If you are between sizes, choose the next size up. Tungsten rings cannot be resized, so please check your size before ordering.
If you use a printable ring sizer, print it at 100% scale. Measurements are approximate.
